A WIP

And a helpful knitting cat.

The knitting is a Pine Forest Baby Blanket, for my SO's daughter and hubby who are adopting an infant in February. The cat is Beau, the Feline Destroyer of all Things Nice. At least he did not do any damage here.

The last swatch (for now)

It took me some research to understand what "twill" is when it comes to handweaving. Basically, you are creating staggered floats across the fabric, with the back being the reverse of the front. If using a rigid heddle loom, this is more easily accomplished using two (or more) heddles. Since I am swatching on a swatch maker, I did it by hand, which helped me understand just what twill is.

The warp is in light gray, the weft in dark gray, both are Cascade 220. If I understand the nomenclature correctly, this would be a 3/1 twill: over three threads, under one, repeat. On the front, the light gray barely shows.

The back is dramatically different. This is a good example of how swatching can help determine the results. If I had thought of it, I could have done a variety of twills in the swatch - 1/1, 2/1, 3/1, 4/1 - to see how the two colors work together.

When weaving in ends, I was careful enough that they don't show... much. The hemstitching really shows on the back, of course. That would be something to keep in mind when working something reversible.

Now that I have my four swatches completed, I'm eager to hear the guild presentation and see what other examples there are. Swatching has also taught me that I don't need to always be creating a finished object to enjoy weaving - or knitting, for that matter.

Swatch #3

Here is the third swatch, in checks, in preparation of the next weaving guild meeting. The colors are what I might call wine and rose, in Valley Yarns Valley Superwash DK. The selvages look better; I just carried the yarns up one side.

I still haven't marked any vertical lines on the swatch maker. However, I am getting better at warping through the holes. My method involves wrapping the yarn around two chairs as I go, to keep the yarn from snarling. Kind of annoying but effective.

I'm still color-challenged, but I am working on it. Converting a color photo to black and white helps determine contrast. I think these two colors are okay in that department despite being in the same hue family.

One more swatch to go, in twill. That will be a bit challenging on the swatch maker, but doable. I'm getting more comfortable with hemstitching.

Another homework swatch

My goal is to complete four swatches before the next weavers guild meeting, plus do xmas. This is swatch number two, a log cabin pattern, in dark brown and tan. If you ignore the selvages, it turned out okay.

The pulling in of the selvages is a common problem when weaving by hand. I think adding some more lines to the swatch maker should help, two vertical ones where the selvages should be.

My SO found this design so dramatic that he wants a log cabin scarf in the same colors. I will hemstitch it, like I did here, but not do the lattice fringe.

Big hat for a big head

My goal in knitting this watch cap was to end up with a hat long enough to fold up a lot (if that makes any sense). I wanted the brim to look fat and to cover my ears and keep them warm. I got that, and more.

Pattern: Watch Cap, by Judith Durant
Yarn: my homespun, from Butterball
Needles: US8 and US7
Modifications: Knit first 3" with US8, switched to US7 for the rest; deeper than called for

The hat stretched out a bit from the blocking, so now it is too deep. I can barely keep it above my eyes. So I may remove an inch or so from the crown, sometime.

Self-imposed homework on a swatch maker

I belong to the Fort Wayne Spinning Guild, which has been an enlightening and inspiring experience. Such a welcoming, talented, and encouraging group! At each meeting, when business is taken care of and show-and-tell is over, there is a program. This year, several of the programs are about color.

I swear I must be missing some cones and rods in my eyeballs because I find myself color-challenged. I can't tell the difference between navy and black unless they are side by side. When choosing colors to knit or weave, I tend to go for tried-and-true basics like red-black-gray or primary colors, or I let the yarn manufacturer decide for me (e.g. self-striping sock yarn). When I knit my SO a vest of many colors, I let him do the picking AND the ordering of the thirteen colors.

The last meeting's program was on color theory for weaving, and it was very helpful. Sara is our current president and a college professor and now a blogger. She presented a mini-lecture on color theory which helped my left brain understand, or at least begin to.

The next guild program is the first of three on color and weave, with 2-color examples on a 4 harness loom. Everyone in the guild uses harness looms for most if not all of their weaving. I am the lone holdout, not because I am anti-harness but because I like my rigid heddle looms and pin looms and toy looms. Someday I may graduate to a harness loom, but for right now, I am happy with what I have.

I am also one of the newest weavers in the guild, and one of the most distracted. I don't always have weaving to share at show-and-tell because there is knitting and spinning and dyeing to do, too. The examples for the next presentation are going to be in log cabin, straight twill, hounds tooth, and checks. I decided in order to get the most out of the program, I should work up some examples of each of these design patterns.

Not wanting to create anything big, I turned to my Swatch Maker 3-in-1 Weaving Loom. I have not used this nifty little device much, so creating some samples on it kills two birds with one stone.

Already I have an idea for an improvement to this device. The weft is "beat" with a comb or fork, so getting a straight line is not easy. After creating one swatch, I penciled in lines to help me get a straight weft in the future. I would also recommend they replace their needles with ones with curved points.

For a hounds tooth pattern, the warp consists of two threads of one color, then two threads of another, repeated across the board. Likewise, the weft is two picks of one color followed by two picks of the other color. The weaving action then creates the design. Simple, no?

I've tried hounds tooth before, with unsatisfactory results because I beat the weft too hard, squishing the pattern. This time I made sure to not repeat the same mistake. I also hemstitched, something I think almost every woven object needs, and tried something a little different for the fringe. Besides being a tidy little example for show-and-tell, this can then be used as a mug rug. Weaving is so practical!

A spinning experiement

Recently I purchased some dyed roving in what we will call turquoise and chartreuse. I had seen these colors together elsewhere and wanted to spin them together. My idea was to spin singles in each color, then a single with both colors combined, ending with a three-ply yarn.

I was somewhat disappointed in the quality of the yarn. It felt overly processed and stiff, and it was not much fun to spin. Looking back, I should have teased the fibers apart before spinning, to see if I could get them to draft better into the twist.

To blend the two colors, I used my blending board, layering one color, then the other, then rolling them together to create a rolag.

If I were to do this again (and I just might!), I would take the rolag and reblend it, as the colors were not actually mixed. The resulting single was mostly one color or the other or the two "barber poled" around each other. Not exactly what I was aiming for.

My spinning wheel has two spindles on it, but for a three-ply, I needed a lazy kate. I don't currently have one, so I rigged one up with US8 knitting needles and a shoe box. This worked fine, although a little drag on the bobbins would have been helpful.

I like the colors, but the result was not quite what I was aiming for. I like the bulky three-ply yarn, but there isn't enough to do anything with it. These are both good excuses to get more roving and give it another whirl. Right?

And there were bunnies, too!

Last Saturday I attended a workshop on how to spin angora. For those of you who don't know, angora does NOT come from angora goats - that's mohair. Angora fiber comes from angora rabbits. According to the instructor, Peggy Coffey, angora is nine times warmer than wool, which is one reason few garments are made exclusively from angora.

Another reason not to use 100% angora is the fiber does not have scales like wool. It is slippery and needs a LOT of twist to hold together. Mixing angora with wool helps alleviate both the issue of the fiber being too warm and too slick.

Some breeds of angora rabbits are sheared or clipped, but the ones Peggy brought are plucked. Several times a year, they "blow" their coats, which means they start to shed heavily. That is when it is time to harvest the fur.

We sampled fur from different breeds of angora rabbits and in different blends. I'm not sure yet how I feel about spinning angora. The tight twist gets kinky very easily. Also, the yarn has a "halo" - hairs that stick out. Although very soft, this halo can also tickle.

My primary reason for attending this workshop was to learn what to do with the sheddings from Hip Hop, an angora-minilop mix rabbit I owned many years ago. Peggy suggested I sandwich the angora between layers of mohair on my blending board since my angora has a rather short staple.

The workshop was held at MoonTree Studios. This was my first visit to this venue, which is a bit off the beaten track. While I was there, about six inches of snow fell, with more coming down as I was leaving. Fortunately, I was able to make it to US30 without trouble and eastward there was less snow even though driving conditions deteriorated periodically. There was so much slush on the front of my car, some of the driver assist technology didn't work. So much for self-driving cars in an Indiana winter!

One pair of xmas socks

In (some) previous years, I have knit xmas socks for those near and dear to me. Not this year, as I find myself distracted by multiple fiber projects - dyeing, weaving, spinning, etc. However, my son relayed a request from his SO for a pair. I complied.

Pattern: Sock Recipe by Stephanie Pearl-McPhee, short-row heel courtesy of Short-Row Toe and Heel Basic Socks by Wendy D. Johnson
Yarn: Austermann Step, colorway 23, Simply Sock Yarn in black for toes, heels, and cuffs
Needles: US1
Modifications: Besides the short-row heel (to maintain the striping), I rounded the toe by decreasing every other round until 40 stitches remained, then decreased every round until 28 stitches remained

This colorway looked better in the skein than it does knitted, IMO. It's also not very festive. The wide stripes worked out for the length, though.

Still a little tight

As a palate cleanser, I decided to spin the alpaca/merino blend I purchased from the Natural Fiber and Yarn Co. Mindful of the shorter staple, I carefully used the inch-worm method of spinning in hopes of improving the consistency of my spinning. Still not there, but getting closer.

After a previous episode of plying, where I tried to ply from a too large center-pull ball, I had the sense to divide this roving into two parts by weight and to spin each on a separate bobbin. But then I tried to ply it all onto one bobbin. It didn't quite work out.

I told myself I could use the mini skein for swatching, but it is pretty messed up. There is always something new to learn, but sometimes I get tired of these learning experiences.

Angry yarn

I specifically purchased some Cormo top with a plan to spin it worsted, to see how it compared with roving spun worsted. This was the yarn on my wheel when I went to a spin-in. Someone at the spin-in took it upon themselves to tell me what I was doing wrong. And then this person commandeered my wheel to show me the right way to do it. The problem was, she was spinning woolen instead of worsted.

I said something to that affect, but it fell on deaf ears. Which resulted on her advice falling on my deaf ears. Later, when I thought about what she said, I actually found it helpful. However, it took a while for me to not get angry all over again every time I sat down at the wheel because my inner child was whining, She ruined my experiment! Consequently, I spun the Cormo too tightly, then plied it too tightly.

One may not be able to tell from this photo the result of this tight spinning, but one can feel it when one touches the yarn. It feels textured. Nubby. Tense.

My first inclination is to swear to NEVER, EVER spin in public again. At least, not until I am a better spinner. But my better self knows a more mature reaction is to remain open to learning from others, regardless of the situation and the outcome. Besides learning what to do, sometimes one learns what NOT to do.